CONSTRUCTION : The main frame is of high grade cast iron and all leavers and other components subject to heavy duty are al manufactured from high quality steel and designed with high safety factor.
MAIN DRIVE : Operating mechanisms are to longer mounted on one common shaft but on two auziliary shafts thus eliminating long cutter leaver. The cutter slides move in substantial guides and driven directly by cranks acentric. This avoids all determental impacts of the cutter of the against each other consequently reduces cutter wear.
CRANK SHAFT : The Crank Shaft is carried in four Bearins. The smooth ruining of the nail machine is thus ensured.
FEEDING MECHANISM : Operated by crank drive which reduces feeding speed. A screw controls the length of intake. The intake cutter is raised mechanically during back stroke so that its wear is considerably reduced.
EJECTOR : One ejector fitted With the punch ensures that the nail are ejected at the right moment, avoiding any bending of nails.
PRESSURE : The necessary pressure on grip of the dies is obtained shaft the roller and acentric of ample dimensions.
Technical Specifications
| Model | Length of Nails Inches | Length of Nail mm | Wire Guage size | Diameter in mm | Production Pcs. per Minute App. | H.P. Required & R.M.P. |
|---|---|---|---|---|---|---|
| SWN-1 | ½" to 1½" | 12 to 38 | 20 – 14 | 0.91 – 2.0 | 400 – 450 | 1.5 X 1440 |
| SWN-2 | ½" to 2" | 12 to 50 | 16 – 12 | 1.6 – 2.6 – 2.0 | 350 – 400 | 2 X 1440 |
| SWN-3 | 3/4" to 3" | 20 to 75 | 14 – 9 | 2.0 – 3.6 | 275 – 325 | 3 X 1440 |
| SWN-4 | 1" to 4" | 25 to 100 | 12 -8 | 2.6 – 4.0 | 175 – 22 | 5 X 1440 |
| SWN-5A | 1" to 5: | 25" to 125" | 6 – 10 | 4.8 – 3.2 | 150 – 200 | 5 X 960 |
| SWN-5 | 2" to 6" | 50 to 150 | 8 -6 | 4.0 – 4.8 | 100 – 120 | 7.5 X 960 |
| SWN-6 | 3" to 8" | 75 to 200 | 8 – 5 | 4.0 – 5.3 | 70 – 100 | 10 X 960 |